Tuesday, March 15, 2011

Importing Autocad Drawings into Revit

 Back in September I wrote this about using Autocad files in Revit and thought I'd rehash it a little for our SMPC blog.


I've found that there are about 5 reasons for importing Autocad drawings into Revit

  • Starting a Revit model from an Autocad design floor plan
  • Referencing consultant drawings
  • Inserting Site plan for locating shared coordinates and or an architectural site plan noting
  • Inserting already established standard details
  • Creating detail components form manufactures details
If you want to use the Autocad information in your 2d out put there is usually some prep work that you need to do.
  • In Autocad export each detail to it's own file.
  • In Autocad if you are going to use the detail in your 2d documentation delete all notes and dimensions
  • In Autocad make sure details is centered on drawing origin (0,0)
  • In Revit Verify your DWG/DWF Color to Lineweight import file is correct for your company/client
    • This will be project's Model managers responsibility
Now import your Autocad drawing. There a couple of rules I've established for myself when doing this.
  1. Always insert Autocad drawings as links into your Revit files, the only time I break this rule is when I'm trying to create a detail components, the family editor doesn't allow you to link autocad files.
  2. For reference drawings put the drawing on a reference workset that is set to be off. typical worksets for this are Site, Mechanical, Electrical, and/or Design (This saves time from having to open every view and turning it off in unwanted time. This saves regeneration time. )
  3. Make sure the Autocad drawing is centered on the origin (0,0). (This avoids the annoyance of selecting a view and you select the wrong view because the view limits are bigger then the view because the origin of one of the detail components is a foot or 2 away from the detail.)
  4. Never explode Autocad files in Revit, trace the Autocad line work with Revit linework. (if you explode an Autocad file in Revit the Revit file will balloon in size which will make maneuvering within the Revit project frustrating) 

Thursday, March 10, 2011

Lost Keynote

We've had this happen on a couple of our projects now where there is a keynote listed in the Reference Keynote schedule but the note is blank. When we go to try and track down the keynote we can't find it in the view. We usually just and to find the note so that we can delete it. There is a quick way to delete these lost keynotes.

  • Open the Reference Keynote schedule 
  • Find the lost keynote in the schedule
  • Click Delete Row from the ribbon

This will delete all instances of the lost note in the project.

Wednesday, February 16, 2011

Walls part1

The only thing we got to really “learning” about walls is:

The awareness of the “location line”.

From Help…

Location Line
A wall’s Location Line property specifies which of its vertical planes is used to position the wall in relation to the path you sketch or otherwise specify in the drawing area. When laying out compound walls that join, you can place them precisely with respect to a particular material layer of interest, such as the concrete masonry units.
Regardless of the wall type, you can select any of the following planes, either on the Options Bar (before placing the wall) or on the Properties palette (before or after):
·         Wall Centerline (default)
·         Core Centerline
·         Finish Face: Exterior
·         Finish Face: Interior
·         Core Face: Exterior
·         Core Face: Interior
NoteIn Revit terminology, the core of a wall refers to its main structural layer or layers. In a simple brick wall, the Wall Centerline and Core Centerline planes would coincide, whereas they would likely differ in a compound wall. When you draw a wall from left to right, its exterior face (Finish Face: Exterior) is at the top by default.
In the following example, with the Location Line value specified as Finish Face : Exterior, the cursor is placed on a dashed reference line, and the wall is drawn from left to right.
If you change the Location Line value to Finish Face : Interior, and draw another segment along the reference line in the same direction, the new segment is placed above the reference line.

When you select a single wall segment, the blue dots (Drag Wall End controls) indicate its location line.

Once a wall is placed, its location line persists, even if you modify the structure of its type or change to a different type. Changing the value of the Location Line property for an existing wall does not change the wall’s position. 


However, when you use the Spacebar or on-screen flip controls to switch the interior/exterior orientation of a wall, the location line is the axis around which the wall flips. So if you change the Location Line value and then change the orientation, it may change the wall position as well.
Note that the position of the blue dots does not change until you deselect and reselect the wall.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

The other thing we showed was the ability to go look in the source files for walls.  You can include your procedures to do this or link them to the Revit Standards.  I will leave this to you how you want to show this.

Bruce Gunderson, CSI, CDT
Architectural Intern / BIM System Administrator

Sunday, December 28, 2008

Partiton Types

With Revit there are 3 things that make up a partiton types the first is the Partition type tags, the partition type (wall) schedule, and the Drafted partiotn type diagrams

Monday, December 22, 2008

We are up and running.

Sunday, December 21, 2008

SMPC blog

As SMPC's BIM Manager i"m going to try this new blog that should just be for SMPC employees